CAN / CAN FD repeater with screw terminals
Ixxat repeaters are used to establish a physical coupling of two or more segments of a CAN or CAN FD bus system. They can be used to implement tree or star topologies as well as for long drop lines. In addition, network segments can be electrically decoupled using a galvanically isolated repeater.
The CAN-CR100 is used for galvanic isolation of two segments of a CAN / CAN FD network. As a special feature, the repeater separates a defective segment from the rest of the network, allowing the remaining network to continue working. After the fault has been eliminated, the segment is automatically switched back to the network. The galvanic isolation is provided for the CAN / CAN FD segments as well as for the power supply.
CAN and CAN FD repeaters increase your system reliability with almost no influence on real-time behavior.
For harsh environments
Ixxat repeaters decouple CAN or CAN FD segments galvanically up to 4 kV and are also available as variants with fiber optics.
Easier wiring and reduction of cables reduces the cost of your system.
- CAN and CAN FD interfaces in one device
- Cost savings due to simple wiring
- Increased system reliability
- Almost no influence on real-time behavior
- User manual
|Display||Transmit and defective segment (two duo LEDs, one for each segment), Power (one LED)|
|CAN bus interface||ISO 11898-2 with CAN choke. Two screw terminals. Available with and without integrated CAN termination.|
|CAN bitrates||Up to 1 Mbit/s|
|CAN FD interface||ISO CAN FD and nonISO CAN FD|
|CAN FD bitrates||Arbitration rate up to 1000 kBit/s, data rate up to 8000 kbit/s. The data rates are verified by tests. User-defined bit rates are possible.
Attention: The maximum data rate can be exceeded depending on the concrete operating conditions (cable length, settings made, remote stations,…), but it can also not be reached.
|Delay||typ. 175 ns (corresponds to ~35 m bus length)|
|Power supply||9-36 V DC, typ. 70 mA, max. 100 mA, through terminals|
|Galvanic isolation||1 kV DC / 1 sec, 500 V AC / 1 min; CAN 1, CAN 2, and power supply are galvanically isolated from each other.|
|Temperature range||-20 ºC … +70 ºC|
|Housing, size||Plastic enclosure, 22.5 x 105 x 114 mm|
|1.01.0210.20000||CAN-CR100, with bus termination resistors|
|1.01.0210.20200||CAN-CR100, without bus termination resistors|
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.
Main: +27 (11) 548 9960
Sales: +27 (11) 548 9970
Copyright © 2023 Industrial Data Xchange. All rights reserved.
FOLLOW US ON SOCIAL MEDIA