Select Page

2 Channel standard RS 485 PROFIBUS repeater module

2 Channel standard RS 485 PROFIBUS repeater module for 12 Mbps with diagnostic LEDs and redundancy feature. Bus connection is utilised by screw terminals and an additional DB9 connector. The repeater channels are directly connected with the ProfiTrace OE core in the 1B/1C Head Station. Busmonitor data is directly available on the web server.

The advanced 12 Mbps core of the repeater module can be cascaded unlimitedly and has increased RS 485 strength. The data traffic is constantly monitored for glitches that are digitally filtered out. Every channel has on-board switchable termination and able to drive 31 devices.

Product Information

Electrical & Mechanical

  • 2 Bus channels
  • Maximum 31 devices per channel (busloads)
  • 1200 m cable length (depends on baudrate)
  • No limit to cascading
  • Termination switches for each channel
  • Screw terminals + one DB9 connector (1-on-1)
  • Wire diameter (for the screw terminals): < 2.5 mm2
  • Wire type: stranded or solid core

Protocol

  • PROFIBUS DP
  • DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive, and any other FDL based protocol
  • All baud rates
  • No bus address required
  • Transmission speed detection: Auto detect (< 10 s detection and 50 s time out)
  • Data delay time (normal mode): 1.6 TBit at 9.6 kbps .. 93.75 kbps; 1.7 TBit at 187.5 kbps .. 500 kbps; 1.8 TBit at 1.5 Mbps; 2.0 TBit at 3 Mbps; 2.75 TBit at 6 Mbps; 3.75 TBit at 12 Mbps
  • Data delay time (redundant mode): 11.6 TBit at 9.6 kbps .. 93.75 kbps; 11.7 TBit at 187.5 kbps .. 500 kbps; 11.8 TBit at 1.5 Mbps; 12.0 TBit at 3 Mbps; 12.75 TBit at 6 Mbps; 13.75 TBit at 12 Mbps
  • Delay time jitter: Max. ¼ Tbit

Backplane

  • 4 Networks selectable with switches
  • 10 Modules (positioned in the first 10 slots)
  • 300 mA current consumption
  • Power supply: provided through the backplane
  • Compatible backplane units: 101-200011, 101-200012, 101-200023, 101-200024, 101-200027

Others

  • LEDs (Error, Rx data, Termination ON)
  • Operating temperature: 0..60 °C
  • Dimensions (LxWxH): 115 x 100 x 25 mm (without backplane)
  • Weight: 118 g
  • Head station firmware: All
  • Redundancy: diagnostics LEDs and redundancy feature

Book your product

We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.

Copyright © 2021 Industrial Data Xchange. All rights reserved.